Pick a color

Boxed/Wide

Boxed
Wide

Content width

1200
1040
960

Select headings font

Background (Boxed)

3 Way Metallic Flow Limiter Pilot

<< Volver a la galería

3 Way Metallic Flow Limiter Pilot

Description

With this metallic pilot mounted on a hydraulic valve using a steel plate with a hole inside (calculated for every need), we get a flow limiter hydraulic valve.

Materials

Body and cover

Brass

Screw, nut and washer

Stainless steel

SpringStainless steel
DiaphragmNatural rubber
Shaft
  • Stainless steel
  • Brass
Connections1/8” socket BSP
Max. pressure:16 bar (232 psi)
Working range:1,4 – 16 bar
(20 – 232 psi)
Inside diameter:3,5 mm
  • To regulate the pressure is used the upper screw of the pilot. Tightening the screw will increase the equilibrium pressure and loosening it will diminish. The screw will be rotated slowly in order to stabilize the pressure.
  • Reaching the desired pressure, the position of the screw will be fixed by the nut.
  • For proper operation of the pilot, it is recommended to respect the assembly diagrams, using suitable fittings for the type of thread.
  • Seal the connectors with Teflon tape or liquid.

Productos relacionados